AuraGen 6000 S/L4

AuraGen 6000 S/L4
  • Click to enlarge

$324.99


Product Information
Specification

The AuraGen L4 Series is a specially designed Dual Amplifier System that uses (2) output channels to run (2) totally different frequency programs at the same time.

  • The first channel is a Rife type amplifier that has a dynamic range of ~ 0 Hz - 100 Khz (although a usable range without too much power loss would be ~ 5Hz - 95kHz). This channel generates a single pulse event with each input signal.
  • The second channel employs a Very Unique design that features Pulse-Within-Pulse modulation. This channel has a dynamic range of 0 > ~3500 Hz after which it becomes a constant 'On' signal of ~ 27 kHz source/ no pulsing.

Pulsed Zapper

What makes the second channel so Unique is that the internal pulses are based on the Dr. Hulda Clark mid-range of frequencies and is centered around the ~ 25 Khz > 35 Khz window depending upon the accessories used.     

Reference the oscilloscope images provided. The first image is the 1 Khz pulse pattern obtained from a 1 Khz square wave pulse input and the second image shows the actual pulse-within-pulse modulation of 26.6 Khz in this case.

These images were taken from a probe laying along side of a 6" Plasma probe - so this is the actual electromagnetic pulse energy emitted by the plasma.

The next (2) images were taken from the Mag Strobe with the probe laying on the Strobe - same frequency.  As you can see the frequency pattern is very different while the actual frequency of 1 Khz remains the same. 

Please Note:

The Plasma Probes and the Mag Strobes are 'transmitted' energy PEMF pulses - they only transmit and do not form a a path between them thru your body alone.

 

Transfer Dielectric Films:

The Transfer Films are very different from the Plasma or Mag devices.  They actually form a path between them across and thru your body. They do this because they use both Negative and Positive electrical polarity pulses.  When the films are placed across your body - they are linked thru the electrostatic field they generate. They also link with the Plasma and Mag devices - especially the Mag Strobe as they also carry an electrical static charge.

Additionally both the films and the Mag Strobes can be used as single polarity devices - they will pass only pulses of a Positive or Negative charge thru you so you can choose which polarity 'Flavor' works best for you.

An important feature is that both channels are fully isolated from each other - so both channels can be used at the same time without interfering with each other. 

> So you can run (2) totally different frequency programs at the same time!

The L4 channels input your selected frequency patterns and transforms it into the AuraGen format of high voltage electrostatic pulses that drive all of the AuraGen accessories - Transfer films, Plasma Probes and Mag Strobes.

 

Simple Operation - Plug and Play:

The L4 is designed to 'direct drive' from any computer software program but especially designed for the Frex16 program. We supply the cable to simply jack it in and you're ready to run the best software and equipment made.

You can also input any other signal format from any frequency source.

 

Making the Silver to Taste:

Besides the photonic/ magnetic and PEMF accessories, the L4 can drive our Ag3000 Colloidal Silver Generator to produce the solution at your own specifications.
If you find a Rife/ Beck frequency or program (we recommend FreX) that seems to help you, the L3 can be set to form the silver solution AT THAT Frequency!
Since the Silver was made at that frequency - the molecules are 'shaped' to that frequency range!
So when when you use that frequency with the Silver - they have matched frequencies between them we think this might be especially useful for working Silver Ionic  skin contact with the Transfer Films

The films cause a vibrating effect that helps the solution be absorbed but we believe that the matching frequency will enable an enhancement of the Silver effect - resonance between the process and the Silver solution.

 

Using the L4:

Compact and easy to use - the L4 uses advanced power circuitry learned from users response for much higher output power and enhanced input capabilities. Designed to drive from TTL level/ computer frequency sources for very simple operation. 

The L4 System includes all the tools you will need to explore with:

High voltage Transfer films
Direct drive to external devices - Protected circuitry
Advanced EX Series Magnetic Pulsars
Plasma Probes - high power - in colors of choice/ Red - Blue - Green
Digital Display of input frequencies
Ability to make both ionic and colloidal Silver solutions at variant levels 

(Note: the Ag Silver Generator is sold separately)
Full support accessories - everything you  need 

 

Background:

All AuraGen Technologies are based on pulsed High Voltage energies of harmless electrostatic electricity. It is Important to understand that these pulses are  DC and Not sine wave or alternating voltages (AC).  

The L4 Systems use (3) types of accessories to produce energy waves that travel across and thru you: pulsed electrostatic fields/ magnetic pulses and photonic pulses - Plasma. 

These accessories produce energy waves of electrostatic, magnetic and select Photon flux across your body at frequencies that you can set and read digitally on the large .5” high LED readout.

These energy waves can pass thru your entire body from head to toe or you can direct and concentrate them in patterns and at specific locations.

 

Operation

Operation is very simple: you place which accessories you want to use - where you want the energy fields to be directed and concentrated and then you adjust for the relative power. Rife frequency programs like Frex16 (which we recommend) have volume control built in as does your computer - make sure these setting are at maximum before adjusting the output power from the L4. 

A single toggle switch allows you to view the frequency of each channel thru the LED display separately.

Start-up: Simply rotate the Master power control past the click and the unit will turn on. The red Power On indicator light and the LED Digital Frequency Display will light up.


The Family of Accessories used with the L4 Series

1)   Transfer films, laminated Dielectric Transfer films used for Primary body field charging

2)   Magnetic Strobes, spiral wound magnetic and electrostatic pulsars, reversible, with polar N/ S

3)   Plasma Probes, (2) 6" tube Probes, Primary colors of Red & Blue (other colors available upon request) 

Transfer Films: 

Transfer Films: are specially designed and constructed dielectric conductive films that are laminated for durability and long life. They can be used in any combination with any of the accessories. 

The films come in (2) basic sizes: Large – which is primarily used on the back to provide a full body charge, Medium – which are used to direct and concentrate the energy pulses to specific areas like arms and feet. 

Mag Strobes: 

The New Mag Strobe 4EX is the latest in the AuraGen Family of highly specialized magnetic pulsars.

AuraGen Mag Strobes are unlike any conventional magnetic pulsars.  Where the other technologies generate slow and high Gauss pulses, the AuraGen Magnetic Strobes generate very fast magnetic pulses that are coupled with a high voltage electrostatic energy field that evolves at the same time and in the same direction as the magnetic field.

Mag Strobes use a 2 dimensional spiral magnetic winding which in plasma physics is also called a magnetic Z pinch because the spiral winding generate a magnetic pulse that ‘spirals’ across a flat plane and concentrates to a pinch/ point at the center of the winding.

So when the Mag Strobe is triggered the stored electrostatic field pulse along with the generated magnetic pulse contract in a spiraling pinch that concentrates both of the energy fields to a very small point.

Last the New 4EX is comfortable! The 4EX is flexible – that means it can bend around curves like arms, legs and shoulders easily. No more stiff hard shapes or sharp corners, the 4EX will tuck into a sock or a waist band with equal comfort. And most importantly you can lay and even sleep with the 4EX under you so you can continue your treatments while you rest.   

Plasma Strobes: 
The The New Plasma Strobe EX is the latest in the AuraGen Family of highly specialized pulsed Plasma emitters. The AuraGen Plasma Strobe EX Family is unlike any conventional plasma emitters. 

The Plasma Strobe EX delivers breakthrough performance across many fields of Energy Transfer. Where the other technologies generate slow photon pulses with very limited interaction with other energy sources, The Plasma EX operates with all of the of the AuraGen accessories: magnetic, electrostatic. The plasma probes come in the Primary colors of Red/ Blue and Green light fields.

Please Note: ALWAYS turn the unit OFF before plugging in/ out accessories

All AuraGen Systems use high voltage Static electricity so depending on environment, there is a static shock hazard 


AuraGen L4 Basic Pac: 

The AuraGen L4 Basic Pac is a selection of the basic parts of the Auragen 'KD' System that enables exploration into the Auragen World at a modest cost but with full Technology tools.

Basic L4 Pac contains:

(1) AuraGen L4 Driver/ complete

(2) Mag-Strobe 4EX unit

(2) Plasma Strobe EX, 6", Plasma Strobes come in Red, Blue (additional colors available on request)

(3) Transfer Film Set, (1) Large & (2) Medium films

(4) Transfer Cables/ 40” length

(1) Wall plug supply/ 12 volt output

(1) Basic operations manual/ comprehensive updated information available on-line 

   >For more information on this product and others we have for sale - please visit our Store<

Caution:  Please read Owners’ Manual Instructions and all Warnings before using 

HIGH VOLTAGE ELECTROSTATIC FIELDS ARE PRESENT - USE AT YOUR OWN RISK!  

Persons with Medical conditions using heart Pace makers or epilepsy conditions and women who are pregnant are advised against the use of the product. The AuraGen Series is sold for Adult use only; there are no known Medical or health benefits from the use of these devices and none are claimed. Please contact the manufacturer for additional questions or details.

Warranty:  All units and accessories carry a Limited (1) Year Warranty against defective parts or manufacturing defects.

RETURNS: Please contact the manufacturer before returning any systems, authorization is needed for approval. All returns must be in the same shipping/ packaging with all accessories included. Any return that shows mishandling, tampering or attempted modifications will be rejected.  

All AuraGen Systems and accessories are manufactured in the USA by Auragen Technologies LLC, Sub. of Andromeda Laser Group/ USA. All Rights are Reserved, this technology is covered by (1) or more US Patent Applications

Product Code AUR000N736
Condition New
Weight 4.500lb

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart