AuraGen 6000 KD - 2017 Model

AuraGen 6000 KD - 2017 Model
  • Click to enlarge

$169.95


Product Information
Specification

AuraGen  6000 (KD) Digital Bio-Pulsar Systems


 

The AuraGen 6000 (KD) Systems are the latest in Bio-Enhancement Systems offered by AuraGen Technologies LLC.

The (KD) Series are specifically designed to provide full frequency generation, control and visual/ audio indicators of the most popular RIFE, Beck and Nogier frequencies.

Now you can truly pulse at specific frequencies and use all of the available pathways into your existence.

 

INTRODUCING THE NEW 2017 MODEL AURAGEN 6000 KD SERIES!

What's New 

 > Improved low end frequency control

> Simplified controls - (2) frequency controls

> Simplified start-up - instant On with Master frequency control

> Higher output Powr Boost Jacks -2X of the 2016's 

> Now with (2) Mag Strobes!

> Drives the AuraGen Ag Series Silver Ionic/ Colloidal generators

 

Overview:    

All AuraGen Technologies are based on pulsed High Voltage energies of harmless electrostatic electricity. It is Important to understand that these pulses are  DC and Not sine wave or alternating voltages (AC), The (K) and (KD) Series all produce phasic and biphasic pulse treatment depending on how the accessories are powered by which output jack is used. 

While the accessories will produce sub-sets of higher frequency (ringing) within each pulse, the initial and dominant voltage polarity is DC and not AC.  

/KD6000-1.jpgThe (KD) Systems use (3) types of accessories to produce energy waves that travel across and through you:
* pulsed electrostatic fields 
* magnetic pulses
* photonic pulses - Plasma. 

The KD units produce fully adjustable pulses of High Voltage electrostatic energy that are used to power the Transfer films, Mag Strobes and the Plasma Strobe accessories line.

These accessories produce energy waves of electrostatic, magnetic and select Photon flux across your body at frequencies that you can set and read digitally on large .5” high LED readout.

These energy waves can pass thru your entire body from head to toe or you can direct and concentrate them in patterns and at specific locations.


Operation & Controls

Operation is very simple: you place which accessories you want to use - where you want the energy fields to be directed and concentrated and then you adjust for the frequencies that you want to explore.

Once you’ve set-up the accessories you press the Test pushbutton to make sure the energy fields are not uncomfortable.

Controls:

Start-up: Simply rotate the Master frequency past the click and the unit will turn on. The red Power On indicator light and the LED Digital Frequency Display will light up.

Frequency Control: (2) rotational controls provide full control over the frequency range. 


How AuraGen works 

AuraGen 6000 (KD) Systems generate very short pulses of high voltage fields made of static electricity that ‘charge’ your entire body. AuraGen K Systems generate (2) very different pulses at the same time just as the early RIFE machines did. 

The high end frequency is a pulse that ranges from 30 KHz to 100 KHz depending upon the accessories and how they are used. The base frequency 'strobes' the high frequency pulse from 0 to over 2000 Hz. depending on the setting you choose to use. By using (2) very different frequency bands, the KD Systems can influence targets in ways that conventional pulsed energy systems simply can’t.    

These energy pulses are transferred thru your body using special Dielectric Transfer films that interact between themselves, the Plasma Strobes and the Mag Strobes. By using the different accessories you can direct – define and concentrate which type of energy fields you want or the combination of energies that best suit your needs.


Body Aura with Whole Body Charging  

All AuraGen technology is based on charging the Body Aura with an energy field and either using that energy field alone to establish a Whole Body presence or use it with the accessories to produce different energy fields in specific locations and combine them and to concentrate the energy fields in patterns.

/KD6000-2.jpgAny of the accessories can be used to generate a Whole Body Energy field with any electrical - magnetic - photon 'flavor' or polarity.

The different accessories can be used to generate a specific pulsed Photon color in the head region and very specific magnetic pulses in separate location while applying different electrostatic energy fields to different areas of the body.

For example, you can use a pulsed Blue Plasma wand to visually meditate while several magnetic strobes pulse selected areas and organs and you are also using a large film under your back to charge your upper torso with a pulsed negative field charge and then use separate medium films to charge your lower legs with a positive pulsed voltage.

This is what we mean by ‘Body Aura’ and ‘Whole Body Charging’ and only the AuraGen technology can generate all these different events at once.  


 

 

Silver Ionic/ Colloidal generation

/KD6000-2.jpgThe New K's are designed to drive the AuraGen line of Silver Ionic/ Colloidal Generators. The K's have special output jacks that connect directly to the generator.  You can generate both forms using current limited pulsed DC at different power levels - low power for Nano particles for example.

The very unique feature of this is that you can MAKE the silver solution at a frequency that you find helpful - so if you like a frequency, you can make your silver at that frequency so when you use the films for example the frequency of the films can match that of how the Silver was formed. The Ag Systems are sold separately

For exact frequency control of up to 100 Khz - we recommend the L3 Series. The K Series is designed to 'sweep' around a frequency point and that frequency will shift when using the films as the interaction with your body changes

 



Accessories

There are (3) Families of accessories used with the KD Series

  1. Transfer films, laminated Dielectric Transfer films used for Primary body field charging
  2. Magnetic Strobes, spiral wound magnetic and electrostatic pulsars, reversible, with polar N/ S
  3. Plasma Strobes, (2) 6" tube Strobes, Primary colors of Red & Blue (other colors available upon request) 

Transfer Films 

/KD6000-pads3.jpg/KD6000-pads.jpg

Transfer films are specially designed and constructed dielectric conductive films that are laminated for durability and long life. They can be used in any combination with any of the accessories and can be used in any of the power output jacks including the Powr Boost jacks to provide a wide variety of voltage polarity and pulsed power levels. 

The films come in (2) basic sizes: Large – which is primarily used on the back to provide a full body charge, Medium – which are used to direct and concentrate the energy pulses to specific areas like arms and feet. 

Mag Strobes                                               

/KD6000-4EX.jpgThe New Mag Strobe 4EX is the latest in the AuraGen Family of highly specialized magnetic pulsars.

AuraGen Mag Strobes are unlike any conventional magnetic pulsars.  Where the other technologies generate slow and high gauss pulses, the AuraGen Magnetic Strobes generate very fast magnetic pulses that are coupled with a high voltage electrostatic energy field that evolves at the same time and in the same direction as the magnetic field.

Mag Strobes use a 2 dimensional spiral magnetic winding which in plasma physics is also called a magnetic Z pinch because the spiral windings generate a magnetic pulse that ‘spirals’ across a flat plane and concentrates to a pinch/ point at the center of the winding.

So when the Mag Strobe is triggered the stored electrostatic field pulse along with the generated magnetic pulse contract in a spiraling pinch that concentrates both of the energy fields to a very small point.

The 4EX can run as a simple magnetic pulsar using any of the basic power ports, but it is specifically designed to run off the New Powr Boost ports.

Last the New 4EX is comfortable! The 4XE is flexible – that means it can bend around curves like arms, legs and shoulders easily. No more stiff hard shapes or sharp corners, the 4EX will tuck into a sock or a waist band with equal comfort. And most importantly you can lay and even sleep with the 4EX under you so you can continue your treatments while you rest.   

Plasma Strobes 

/KD6000-plasma.jpg
The Plasma Strobe EX is the latest in the AuraGen Family of highly specialized pulsed Plasma emitters.

The AuraGen Plasma Strobe EX Family is unlike any conventional plasma emitters. The Plasma EX delivers breakthrough performance across many fields of Energy Transfer. Where the other technologies generate slow photon pulses with very limited interaction with other energy sources, The Plasma EX operates with all of the of the AuraGen accessories: magnetic, electrostatic, audio and of course all of the Primary colors of Red/ Blue and Green light fields.

The EX pulses with each pulse of the KD Driver that powers all of the other accessories so they all pulse in unison to increase the overall effectiveness of each device.

The Plasma Strobe EX Family is designed to operate at increased Lumen output intensity using the New Powr Boost circuitry. (See KD Boost details)  

The EX can also operate as an energy field monitor by simply plugging into any of the opposing basic power jacks. In this mode the Strobes will detect the energy field intensity in locations of your body from other accessories and show the power by the plasma intensity.

Lastly the Plasma Strobe EX can operate as a continuously ‘on’ Plasma/ Photon source at high intensity by simply jacking into the basic Red and Black output ports.

 

Powr Boost Ports

The Powr Boost circuits are designed to power the Plasma and Mag accessories but they can also power the Transfer films with additional pulse power. 

Frequency Ranges:

> 0 to over 1200 Hz   NOTE: actual frequencies depend on whcih accessories are being used

Daily Operation

The K/ D Series are designed for years of use without any maintenance.  The Systems are design to actually Improve With Use. They become more frequency stable and the Plasma will become brighter the more you use it. We have had units in the field for years now and a lot of people sleep on the films and Mag Strobes all night - every night. So use it without any concern that you will burn it out. 

An important Note: you cannot damage any of the accessories or the K/ D unit thru misplacement of the accessories as you jack them. .

Please Note: ALWAYS turn the unit OFF before plugging in/ out accessories

All AuraGen Systems use high voltage Static electricity so depending on environment, there is a static shock hazard 


AuraGen 6000 (KD) Basic Pac

The AuraGen (KD) Basic Pac is a selection of the basic parts of the Auragen 'KD' System that enables exploration into the Auragen World at a modest cost but with full Technology tools.

Basic (KD) Pac contains:

/KD6000-2.jpg(1) AuraGen 6000(KD) Driver/ complete
(2) Mag-Strobe 4EX unit
(2) Plasma Strobe EX, 6", Plasma Strobes come in Red, Blue (additional colors available on request)
(3) Transfer Film Set, (1) Large & (2) Medium films
(4) Transfer Cables/ 40” length
(1) Wall plug supply/ 12 volt output
(1) Basic operations manual/ comprehensive updated information available on-line 

 



Caution:  

Please read Owners’ Manual Instructions and all Warnings before using 

HIGH VOLTAGE ELECTROSTATIC FIELDS ARE PRESENT - USE AT YOUR OWN RISK!  

Persons with Medical conditions using heart Pace makers or epilepsy conditions and women who are pregnant are advised against the use of the product.                        

The AuraGen Series is sold for Adult use only; there are no known Medical or health benefits from the use of these devices and none are claimed. Please contact the manufacturer for additional questions or details.

Warranty

All units and accessories carry a Limited (1) Year Warranty against defective parts or manufacturing defects.

RETURNS: Please contact the manufacturer before returning any systems, authorization is needed for approval. All returns must be in the same shipping/ packaging with all accessories included. Any return that shows mishandling, tampering or attempted modifications will be rejected.  

All AuraGen Systems and accessories are manufactured in the USA by Auragen Technologies LLC, Sub. of Andromeda Laser Group/ USA. All Rights are Reserved, this technology is covered by (1) or more US Patent Applications

 

 

 

Product Code AURRTPWB10
Condition New
Weight 2.000lb

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart