Transfer films

Transfer films
  • Click to enlarge


Product Information

AuraGen Technologies Transfer Film and Cable Accessories Set 

Included in this Accessories Set;

  • (2) Large Transfer films
  • (2) Medium Transfer Films
  • (4) Powr Cables, 40" length with male/ female connectors 


The Accessories Set is compatible with any AuraGen K, K/ D and S Series Bio-Electric Pulsar systems.
These films and cables are designed for years of continuous use.
The Transfer Films are fully laminated and waterproof and the cables are protected with plastic cable wrap to protect against wear and tear from use.

Technical Data:


There are (3) Oscilloscope photo's included to show actual pulse wave-forms using a K/ D pulsar.

  • Photo #1 shows a dual channel readout that shows the voltage drop across (2) Transfer Films when the K/ D triggers. The K/ D Series output a split voltage potential - one channel is positive and the other is negative and when the system triggers - both channels drop to neutral/ ground potential. So this photo shows both films dropping from positive and negative to ground.
  • Photo #2 shows the actual pulse rate of the K/ D unit as it triggers the Transfer Films. The pulse rate shown is 833 Hz.
  • Photo #3 shows the actual rate of voltage swing as the static charge on the film drops form positive to ground. This is for a single free standing film. The rate of voltage change is 3.75 Microsecond which is a fast voltage swing. The voltage swing will change depending upon what other accessories are used and where the films are located relative to each other. But in most instances the voltage drop will be 10 Microseconds or less.







Product Code TRA7E61A39
Condition New
Weight 0.500lb

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.

eCommerce by CubeCart